Vertical Machining Center / Box Way Series

Helping You to Boost Your Productivity!

YH1000-A(BT50)

X, Y, Z-axis travel:

1020 x 610 x 610 mm

  • Four box ways on base.
  • Box ways on three axes.
  • 10000 rpm belt-drive spindle. 
    6000rpm belt-drive spindle.
    BT50 spindle taper.
  • 24 tool arm type magazine.
  • Fully enclosed splash guard.
Specifications


 

Rugged Construction Designed to Meet your Heavy Cutting Demand!

 

  • Meehanite cast iron is tempered for stress relief to ensure structural stability without deformation.
  • Extra wide 4 box ways are hardened and precision ground.
  • Box way surfaces are coated with Turcite-B for wear resistance.
  • Box type oversized column provides an increase in structural rigidity and stability.

4 Box Ways on Base (YHA)

The massive base is designed with 4 box ways combined with large span between ways. This provides a firm support for heavy loads without deformation of table.

 

Heavy Column

The box type massive column is scientifically rib reinforced to achieve greater stability when performing heavy cutting.

Option

Belt-drive Spindle (standard)
(For all models )

  • 6,000 rpm spindle speed is standard.(BT50)
  • 10,000 rpm spindle speed is standard.(BT40)
  • 12,000 rpm spindle speed is optional.(BT40)
  • Choice of spindle nose tapers—BT40, CAT40 and DIN40.
  • The spindle is dynamically balanced for extremely smooth running.

Gear Box-drive Spindle (standard)
(For models / YH 1400-A, YH 1600-A, YH 1800-A)

  • Spindle speed – 6,000 rpm.
  • #50 spindle nose taper.
  • The spindle is dynamically balanced for extremely smooth running.

Direct-drive spindle (Optional)
(For all models )

  • Choice of spindle speed – 8,000 rpm. (BT50)
  • Choice of spindle speed – 10,000 or 12,000 or 15,000 rpm. (BT40)
  • The spindle is dynamically balanced for extremely smooth running.

 

Spindle Head

  • The spindle head is ruggedly constructed ensuring maximum stability during cutting.

 

Gearbox (YHA Option)

  • The high performance gearbox produces high torque output at low speeds, making the machine suitable for heavy cutting.

 

24-tool Arm Type Magazine

  • Bi-directional, random tool selection.
  • Tool change can be quickly accomplished in only 2.5 seconds (tool to tool)(60Hz).

 

14th Axis Rotary Table (optional)

  • The rigidly constructed 4th axis rotary table is excellent in indexing accuracy and repeatability.
  • Minimum indexing unit is 0.001°

 

Air Conditioner For Electrical Cabinet (optional)

  • Offering even better cooling to the electrical cabinet, prolonging electrical components’ life time.

Spindle Oil Cooler

  • The spindle oil cooler is used to ensure a constant temperature of the spindle, even during long running times. This helps maintain spindle accuracy at all times.

Oil Skimmer (optional)

  • The disc type oil skimmer is used for removing floating oil on coolant, preventing coolant deterioration and odor.

Chip Auger

  • The chip auger is delivers chips to the chip conveyor for easy removal.

Chain type chip conveyor (optional)

Rear Flushing Device (optional)

  • The optional rear flushing device provides efficient removal of chips.

Cleaning Spray Gun

  • The cleaning gun is used for cleaning the workpiece and machine.

Air Gun

  • The air gun allows the operator to clean the workpiece..

Ying Han Technology Co., Ltd.

Address: 46, Hwan-Gong Rd., Yung-Kang Ind. Dist. Tainan Taiwan

Tel: +886-6-2335 611

Fax: +886-6-2335 711

E-mail: sales@hannsa.tw

 

© 2018 Ying Han Technology Co., Ltd. | All Rights Reserved